 |
 |
 |
 |
| Cut zinc angles | Zinc anlge ends | Lights for heat | Bolts |
 |
 |
 |
|
| Assembled Frame | Frame with lights | Finishing |
Making a Plant Specimen Dryer |
provided by Carol Kelloff |
Materials needed:
|
Angled slotted zinc can be purchased in any local hardware store. You will need at least 4 pieces of angled zinc 1-1/2" x 72". 16 - 1" bolts 16 - wing nuts 8" x 24" board 2 - 150 watt flood lamps |
2 - lamp sockets 4 - wood screws 3 yards of canvas ca. 24" width or 1.5 yards of canvas if 48" in width 8 - 1" brass grommets 10 feet of 16/3 power cord with plug |
| |
|
|
|
| Cut zinc angles | Zinc anlge ends | Lights for heat | Bolts |
| |
|
|
|
| Assembled Frame | Frame with lights | Finishing |
